OESD > Stabilizers > Tearaway Bold Fusible 15" x 10 yds

Tearaway Bold Fusible 15" x 10 yds

Floriani Fusible Bold Tearaway is used to support large or dense embroidery on woven fabrics such as cotton, duck cloth, twill, denim or towels. One layer will support approximately 12,000 embroidery stitches. Use this fusible version to prevent stretching during hooped embroidery. The added fusible prevents the fabric from shifting while embroidering, resulting in perfect outline stitches.

Floriani Fusible Bold Tearaway features a multi-directional tear capability, easily pulling away clean from the embroidery design for a crisp look on the front and back. Also available in a non-fusible version.

To use Floriani Fusible Bold Tearaway:

1. Fuse one layer of the stabilizer to the back of the fabric/item. Be sure to use a piece at least one inch larger than the outer perimeter of the hoop to insure proper stabilization.
*Important – Use a low temp (Silk Setting) iron setting. Do NOT touch the surface of the iron to the fusible coating, press from the fabric side or use a press cloth
(muslin or cotton).

2. Hoop the stabilized fabric.

3. Embroider the design.

4. Remove the hoop from the machine and from the garment.

5. Tear away as much of the stabilizer as possible. It may be necessary to re-heat the stabilizer to have it release from the fabric.

**NOTE: All irons heat differently. The iron temperature given above is a starting point. If you find that you are not getting a good fuse, slowly increase your iron temperature until you achieve a good bond between the fabric and stabilizer.

To adequately prepare for classes and events, we ask that you please register at least 2 weeks prior to the start date. Your space in class will not be held withhout payment. Each class has a minimum, and maximum, number of students and may fill, or be cancelled, prior to your payment.

If a minimum number of students is not met, you will be notified, and your class fees refunded, at least 1 week prior to the class start date. If you need to cancel cancel, please call the store at least 1 week prior to class for a full refund. No refunds of class or kit fees will be issued for cancellations under 1 week before the class start date. No shows will forfeit class and kit fees.

Upon registration, please review the list of supplies needed for the class on the class listing. All supplies should be purchased prior to class. Classes typically do not include time to purchase supplies. Unless otherwise noted, all supplies are available at Sew What! Inc. Students will receive a 10% discount on all supplies listed.

We are diligent about enforcing copyright laws; if a book, pattern or embroidery design is required for a class, each student must purchase their own copy. There are no exceptions.

Students should bring their sewing machine with all of the appropriate parts (including the instruction manual, foot control and power cord). Students must be familiar with the basic operation (i.e. winding a bobbin and threading the machine) of their machine for creative classes, and the machine must be in good working condition. Alternatively, a student may pre-register to rent a sewing machine (when avail;able) for creative classes at a rental rate of $20 per class session. Students who experiences great difficulty with their sewing machine during class may need to rent a machine.

Please be considerate of others. Do not bring children to class, wear heavy perfume or use cell phones during class. Please be prepared to start class on time. Our doors typically open 30 minutes prior to your class start time to allow you to set up your sewing space. Classes begin and end promptly at the scheduled time.

Shop By Category

Company Links

Contact Us

Sew What! Inc
(302) 397-8091
contact@sewwhatde.com
4311 Kirkwood Highway
Gordy Plaza
Wilmington, DE 19808

Current Store Hours:
Monday CLOSED
Tuesday 10:00 am - 7:00 pm
Wednesday 10:00 am - 9:00 pm
Thursday 10:00 am - 7:00 pm
Friday 10:00 am - 5:00 pm
Saturday 10:00 am - 5:00 pm
Sunday CLOSED