Viking Foot Free Motion Spring Closed

This foot gives great visibility around the foot when free motion quilting or sewing. It prevents threads or fabrics from getting stuck in the foot and prevents the fabric from lifting as you sew.

How to Use:

1. Loosen the presser foot ankle screw completely and remove the ankle. Place the Closed Free Motion Spring Foot around the presser bar, attach it with the
screw.

Hint: Lower the needle a little bit to make it easier to place the metal guide on the foot in the right position on the needle clamp.

2. Thread your machine.

3. Choose center needle position straight stitch.

4. Set your HUSQVARNA® VIKING® sewing machine to Free Motion Spring Action mode. The feed dogs will drop automatically.

Note: When the feed dogs are dropped, the fabric is no longer fed by the machine. You must move the fabric.

5. Bring the bobbin thread to the top by taking one stitch. Hold on to both threads and sew a few stitches in place to begin.

6. Maintain a consistent speed and move the fabric in a smooth motion. You are creating the length of the stitch as you move the fabric. Use the red markings on the foot as a guide.

Machine Compatibility